Cleanban - Spoofer guide
  • Introduction
    • 😇Welcome to CleanBan
  • Setup
    • 💡Prepare your system
    • ☑️Serial checker
  • Woofing
    • ⚙️Running the woofer
    • ✅Verify serial changes
  • Flashing BIOS
    • 💾Flashing your BIOS
  • Reinstalling windows
    • 🛠️Create installation medium
    • 📒Configure BIOS settings
    • 🪛Reinstalling Windows
      • Normal installation
      • AMD RAID
      • INTEL RAID
  • Finishing up
    • 💫Configure your system
    • Network changes
    • Monitor changes
    • Peripheral changes
    • ✅Verify spoof
    • 🚩Finish
  • ADDITIONAL GUIDES
    • Find a TPM Module
    • Install TPM Module
    • Remove TPM service
Powered by GitBook
On this page
  1. Finishing up

Network changes

Ensure network adapters are disabled and/or spoofed.

PreviousConfigure your systemNextMonitor changes

Last updated 9 months ago

IF WIFI OR BLUETOOTH IS STILL ENABLED AND YOU COULDNT DISABLE IT IN BIOS:

Follow this instructions first ->

Change MAC address

To make sure every Network adapter has a new MAC address please follow this instructions:

  1. Download TMAC:

  2. Extract the downloaded zip file (if you cant unzip it download 7-zip ).

  3. Run TMAC_Setup.exe to install the Technitium MAC Address Changer.

  4. After installation run TMAC from Windows Start or Desktop shortcut as admin.

  5. If prompted, press NO to avoid associating ".tpf" files with TMAC.

  6. Change the MAC Address for the following adapters: Wifi, Ethernet, Bluetooth

    1. Select the adapter.

    2. In the bottom left click Random MAC Address & Change Now!

    3. If error occurs just ignore continue with next adapter.

  7. Restart your computer after changing all MAC addresses.

Click here to view.
Click here to download.
here