Cleanban - Spoofer guide
  • Introduction
    • 😇Welcome to CleanBan
  • Setup
    • 💡Prepare your system
    • ☑️Serial checker
  • Woofing
    • ⚙️Running the woofer
    • ✅Verify serial changes
  • Flashing BIOS
    • 💾Flashing your BIOS
  • Reinstalling windows
    • 🛠️Create installation medium
    • 📒Configure BIOS settings
    • 🪛Reinstalling Windows
      • Normal installation
      • AMD RAID
      • INTEL RAID
  • Finishing up
    • 💫Configure your system
    • Network changes
    • Monitor changes
    • Peripheral changes
    • ✅Verify spoof
    • 🚩Finish
  • ADDITIONAL GUIDES
    • Find a TPM Module
    • Install TPM Module
    • Remove TPM service
Powered by GitBook
On this page
  1. Finishing up

Monitor changes

Changing serials of your monitor using CRU utility.

PreviousNetwork changesNextPeripheral changes

Last updated 4 months ago

General information It is recommended to disable G-Sync/Free-Sync to prevent any issue before you continue on this guide!

NVIDIA ->

AMD ->

FUSER for DMA Users ( Ignore if you don't know what this is )

Please contact your manufacturer/developer to change your device EDID profile instead of following this guide!

  1. Download CRU utility:

  2. Extract the files on Desktop.

  3. Run CRU.exe as admin.

  4. Press Edit on each monitor profile and do following:

    1. ID Serial #: Change the last 4 digits to something random.

    2. Serial Number: Change the last 4 digits to something random.

      1. If empty, just keep it empty.

  5. Repeat this with all other monitor profiles.

    1. If the same monitor has multiple profiles, ensure its same digits you change!

  6. After all are changed exit application & restart your computer.

Troubleshooting

If your unable to boot after doing changes and having a black screen then do this:

  1. Unplug your monitor(s).

  2. Restart Computer, wait a minute

  3. Plug in the monitor again, then restart pc again

  4. If still black screen you might need to repeat this a couple of time or change the port your using.

If your back in Windows please ensure in CRU that serials are still changed if not please disable G-Sync or Free-Sync on your monitor and graphics settings then repeat the steps.

Toggle G-Sync
Toggle Free-Sync
Click here to download.
Changing monitor serials with CRU tool.