Cleanban - Spoofer guide
  • Introduction
    • 😇Welcome to CleanBan
  • Setup
    • 💡Prepare your system
    • ☑️Serial checker
  • Woofing
    • ⚙️Running the woofer
    • ✅Verify serial changes
  • Flashing BIOS
    • 💾Flashing your BIOS
  • Reinstalling windows
    • 🛠️Create installation medium
    • 📒Configure BIOS settings
    • 🪛Reinstalling Windows
      • Normal installation
      • AMD RAID
      • INTEL RAID
  • Finishing up
    • 💫Configure your system
    • Network changes
    • Monitor changes
    • Peripheral changes
    • ✅Verify spoof
    • 🚩Finish
  • ADDITIONAL GUIDES
    • Find a TPM Module
    • Install TPM Module
    • Remove TPM service
Powered by GitBook
On this page
  • Update Windows
  • Install Runtimes
  • C++ Runtimes
  • DirectX Runtimes
  • Assign missing disks
  • Open disk management
  • Create new volume(s)
  • Disable fast boot & restart
  1. Finishing up

Configure your system

Instruction's for reconfiguring and updating your system.

PreviousINTEL RAIDNextNetwork changes

Last updated 7 months ago

Disabling windows security

Press the Windows key and open Setting -> Update & Security then disable following security settings:

  • Real-time scan

You can enable Real-time scan after the spoofing process is done!

Update Windows

  1. Press Windows + I , if Settings are not open yet.

  2. Navigate to Update & Security

  3. Under the tab Windows Updates

    1. Press the button Check for Updates

  4. Wait until updates are downloaded & installed.

Install Runtimes

C++ Runtimes

  1. Unpack Visual-C-Runtimes-All-in-One.zip

  2. Run install_all.bat as admin!

  3. Wait for it to finish...

DirectX Runtimes

  1. Run the dxwebsetup.exe as admin.

  2. Wait for it to finish...

Assign missing disks

If your currently missing disks in file explorer please do following steps:

Open disk management

  1. Press Windows + R key on keyboard

  2. Confirm with ok

Create new volume(s)

  1. Locate unallocated disks, that are marked black as in image below.

  1. Right click on every black / unallocated disk and do following:

    1. New Simple Volume

    2. Specify Volume Size - keep settings default and press next

    3. Select drive letter you want, press next

    4. Format partition - keep settings default and press next

    5. Finish

Now you have all your disks available again.

Disable fast boot & restart

  1. Download FastBootOff.zip and unpack it with the password: cleanban.com

  2. Run fast_boot_off.bat as administrator!

  3. Restart your computer & let the updates install.

Download here:

Download here:

Make sure you uncheck "Install Bing Bar"

Enter diskmgmt.msc in the run window

💫
👍
Click here
https://www.microsoft.com/en-us/download/details.aspx?id=35
239B
FastBootOff.zip
archive
Disabling Real-Time scan
DirectX installer.